An unreliable and inefficient setup can lead to overheating and potential engine damage. Mishimoto is proud to release a thermostat specifically engineered for your 2011+ Ford Mustang V6/V8. Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures. Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (160°F) compared to standard thermostats (180/188°F). This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. As with all our mustang performance parts, this thermostat includes the Mishimoto Lifetime Warranty.
-Direct fit for the 2011+ Ford Mustang V6 & V8
-Lower activation temperature allows coolant to flow through the engine earlier
-Mishimoto Lifetime Warranty
Giving you premium oil pump gears with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty’s.
Billet Crank Sprockets from Boundary follow the same heritage as their oil pump gears, manufactured 100% in house with US sourced materials. These sprockets start with a chromoly steel that is 10 times stronger then the OEM powdered metal, hot quenched with a low temper for the highest strength and resistance to wear.
-All sprockets heat treated to maximum hardness while maintaining toughness
-Precision CNC machined and broached for snug accurate fit
-Dimensions checked after machining and after heat treating for guaranteed fit.
-80% more cross section versus OEM at the keyway
-Weighs 30% more then OEM at 170 grams vs 130 grams giving the highest strength sprocket on the market.
-High finish reduces friction and chain vibration
-New tooth geometry strengthens teeth and keyway
-Mirror Finished and Surface Hardened
-Surface Ground gears for the ultimate in fitment and performance
-Indestructible chromoly core
-Inner and outer gear machined in matched sets
-Each set hand, machine, and hardness inspected with Blueprinting Report
-Made in Dallas, TX
Fits: 2005-2023 Mustang V6/GT/GT500
BMR’s polyurethane motor mounts limit engine deflection, while isolating much of the engine vibration from the vehicle’s occupants. This means you won’t feel a big increase in NVH. The reduction in deflection leads to less wasted power as it’s transferred to the tires, improving your driving experience on both the street and track.
- Laser cut ¼-inch plate steel
- Black anodized aircraft billet aluminum spacers
- Grade-8 hardware
- Reduced engine deflection
- Better throttle response
- Quicker reaction times
- More accurate shifts for manual-equipped cars
- Engine can be lowered up to 1/2”
- Weighs 50-percent less than stock motor mounts
- Designed for street and drag race applications
- Designed to work well with any power level
- Proudly designed and made in the U.S.A.
Fits: 2018-2023 Mustang GT
If you’re looking for a twin-disc clutch that will support an unrelenting amount of power with OE comfort and engagement, this is it! Vengeance by Competition Clutch is designed and manufactured is the USA.
STAGE 1 - Organic Clutch Rated for 750 ft/lb tq
STAGE 2 - Ceramic Clutch Rated for 850 ft/lb tq
STAGE 3 - 6 Puck Rated for 900+ ft/lb tq
Ultra-Smooth Engagement
Low Noise Operation
Flywheel Included
Ships directly from Vengeance and subject to 2-4 week lead time.
Fits: 2011-2017 Mustang GT
If you’re looking for a twin-disc clutch that will support an unrelenting amount of power with OE comfort and engagement, this is it! Vengeance by Competition Clutch is designed and manufactured is the USA. Available in 23-spline for factory MT82 applications or 26-spline for T56/TR6060 applications.
STG1 Organic Clutch - 750 ft/lb tq
STG2 Ceramic Clutch - 850 ft/lb tq
STG3 6 Puck - 900+ ft/lb tq
Ultra-Smooth Engagement
Low Noise Operation
Flywheel Included
Ships directly from Vengeance and subject to 2-4 week avg lead time.
Fits: 2011-2017 Mustang GT
Everyone who owns a manual transmission Mustang has heard the name ‘Mcleod’ somewhere along the way. Intended for the high horsepower enthusiasts, the McLeod Twin Disc Clutch is available in two variants, the RST and RXT. Both are great options and support a substantial amount of power.
RST supports 800 Horsepower
RXT supports 1000 Horsepower
Light Pedal Feel
Smooth Engagement
Excellent Street Manners
Includes Clutch and Flywheel
Fits: 2005-2023 Mustang GT with Manual Transmission Only
The stock clutch line is susceptible to heat and is more likely to fail years down the road.. Upgrade to McLeod’s Stainless Steel hydraulic clutch line for added durability and even flow! The inner Teflon hose resist expansion under pressure while the braided stainless steel covering provides additional reinforcement against expansion as well as protection from abrasion and road debris.
Fits: 2011-2014 Mustang GT
The Driveshaft Shop’s direct fit rear CV Driveshaft eliminates the adapter plate at the rear end with a ground CV to fit inside the pinion flange like the factory. This sheds weight from adapter plates while increasing power holding ability and drivetrain response. Designed to hold over 1000+ horsepower, so even the most extreme engine modifications won't be a problem.
-Aluminum or Carbon Fiber construction
-Compatible with both automatic and manual transmissions
-Billet aluminum endcaps
-300M Chromoly spline plugs
-Spicer 1350 series solid U-Joint
-Forged aluminum U-Joint flange
-1000+ hp Rating
Fits: 2015-2023 Mustang GT
The Driveshaft Shop’s direct fit rear CV Driveshaft eliminates the adapter plate at the rear end with a ground CV to fit inside the pinion flange like the factory. This sheds weight from adapter plates while increasing power holding ability and drivetrain response. Designed to hold over 1000+ horsepower, so even the most extreme engine modifications won't be a problem.
-3.5” Aluminum or 3.25” Carbon Fiber Construction
-Compatible with both automatic and manual transmissions
-Billet aluminum endcaps
-300M Chromoly spline plugs
-Spicer 1350 series solid U-Joint
-Forged aluminum U-Joint flange
-1000+ hp Rating
Fits: 2015-2023 Mustang GT
The Driveshaft Shop’s Direct-Fit Axles are for the Mustang owners looking to beef up their factory axles for more insurance on and off the strip. The Driveshaft Shop uses heavy duty material in their drivetrain components and their parts can be found on many IRS/CV world record cars!
Fits: 2015-2023 Mustang GT
These Ford Performance axles are designed to withstand high power launches without risk of failure.
-Fits in place of production half shafts with no other vehicle modifications
-Severe duty serviceable CV joints with CNC billet centers support up to 1,500 HP
-CNC-machined from aerospace high-alloy materials
-Billet one-piece 34-spline inner and 32-spline outer stub ends
-Axle shafts feature anti-wheel hop technology
-Shafts feature blue powder coating for corrosion resistance
-Built by G-Force Engineering, available only through Ford Performance
-Off-road use only
-Manufacturers limited lifetime warranty on axle bars and stubs, 2 year warranty on wear components
No results match your search. Try removing a few filters.
